TubeTrace Type SP/MP Heavy Steam Traced

TubeTrace Type SP and MP is designed to provide freeze protection or temperature maintenance for metallic and non-metallic tubing with “heavy” steam trace. TubeTrace Type SP and MP is suitable for use with process analyzers, emissions analyzers, and impulse lines to flow or pressure transmitters where steam or hot liquid is the preferred heating media.

TubeTrace Type SP and MP “heavy” steam trace is a metallic tracer tube in direct contact with the process tube(s). “Heavy” steam trace provides predictable heat output along the traced tube(s). The tracer tube and process tube(s) are cabled together thereby mechanically binding the tubes. This ensures consistent heat transfer and performance along the entire length by preventing separation or tube migration within the bundle.

Unlike field fabricated and insulated tubing, TubeTrace engineered pre-insulated tubing provides superior weather proofing and long term reliability.

40°F (5°C) to 400°F (205°C)

PRODUCT LITERATURE

TubeTrace Heavy Steam Product Specification 

TubeTrace and ThermoTube System Accessories Product Specification 

Heated Instrument Tubing Specification 
Tubing Bundles Introduction 

 

INSTALLATION INSTRUCTIONS

FAK-1 Split Bulkhead Entry Kit 
FAK-10-A-B-C: Heat Shrink Seal 
FAK-2 and FAK-2L 90 Degree Elbow Splice Kit 
FAK-4 and FAK-4L In-Line Splice Kit 
FAK-5 and FAK-5L 90 Tee Splice Kit 
FAK-7 Seal Kit 
FAK-8/ FAK-8L: In-Line Splice Kit 
FAK-9 Bulkhead Entry Heat Shrink 
Mechanical Tubing Bundle Bender 
Tubing Bundle Installation Procedures 

 

INSTALLATION VIDEOS

FAK-2 and FAK-2L Installation Procedures Video 
Terminator DP FAK-1 Installation Procedures Video 
Terminator DP FAK-2 and FAK-2L Installation Procedures Video 
Terminator DP FAK-4 and FAK-4L Installation Procedures Video 
Terminator DP FAK-5 and DP FAK-5L Installation Procedures Video 
Terminator ZP FAK-1 Installation Procedures Video 
Terminator ZP FAK-2 and FAK-2L Installation Procedures Video 
Terminator ZP FAK-4 and FAK-4L Installation Procedures Video 
TubeTrace Tubing Bundles Installation Procedures Video 
Division Classification
Terminator DP FAK-1 Installation Procedures Video 

About Company

PECON is a growing and promising Singapore company, we started our commenced our journey in 2011 to work with Process and related industries in the undertaking of Electrical and Instrumentation Engineering service and contracts.

Read More

Connet With Us

Quick Contact

Address

POWER ENGINEERING & CONTROLS PTE LTD

Address:
12B ENTERPRISE RD, ENTERPRISE 10, SINGAPORE 627682
Tel:
+65 67107018
Fax:
+65 65703220
Website:
www.pecon.com.sg
Email:
This email address is being protected from spambots. You need JavaScript enabled to view it.